Personalized Football Window Decal

Home > Miscellaneous >

Football Starburst Personalized Decal

Starting at $8.99

Product Code: WD-SP410

Graphic Size

Personalize

Team name:

Name(s):

Player number:

Misc.

Additional Instructions:

Qty:

Description

High quality white vinyl window decal you customize and personalize to make it special.

Choose from 6", 8", 10", or 12" graphic.

DECAL APPLICATION

1. Clean the area where the decals will be applied with a soft cloth dampened with alcohol. This will remove any wax, oil or dust particles that will prevent the decal from sticking. After wiping the area with alcohol it is best to wipe the surface with a cloth dampened with clean water and let dry.

2. Carefully peel the tape and decal away from the paper backing. Hold the decal in position and stick the top or one side holding the other side up away from the surface. Rub the entire area beginning at the top or side that is on the surface and rub firmly from one side to the other using your fingertips or the sharp edge of a credit card. The decals have a pressure sensitive adhesive the harder you rub the harder it sticks.

3. Remove the application tape by pulling gently in a downward position. If a part of the decal starts to come up away from the surface rub it back down while the tape is still on, then proceed to remove the tape. Note: The decals will not adhere to a surface that has been waxed. Remove all wax and residue with a cloth dampened with rubbing alcohol or denatured alcohol before application. After the decals have been applied, the surface can be waxed over. The wax will not damage the decal, but will prevent it from sticking. By default the decals are cut to be applied to the outside. If you want the decals to be cut to be applied to the inside of a window, please note that in the special instructions box. If you get air bubbles in the decal take a pin or needle and puncture the bubble to release the air.

LARGE DECAL APPLICATION

For large decal application, hold the decal in position and stick the top or one side in place. Then using the sharp edge of a credit card working your way from top to bottom with firm pressure to prevent any air bubbles. To apply extra large decals we recommend getting someone to hold the decal in position while the other person rubs it in place.